Skip to the content
Documentation
Help Start
Reading in:
  • German: 9,059 of 9,059 pages
About the help in other languages
All help pages

logfile.ini [ViewCountSettings]

The settings of [ViewCountSettings] in logfile.ini: SiteAccessList, AllSiteAccesses, MatchSiteAccess, StateDir, LockTimeout, RotatedSuffixes, MaxLineLength, LineRegexp ...

Download as PDF

Address: https://doc.exponential.earth/learninminutes/exphelp/viewer/examples/ini-settings/logfile/ViewCountSettings.md

On this page

logfile.ini [ViewCountSettings]

The block [ViewCountSettings] of settings/logfile.ini, with 15 setting(s).

Never edit settings/logfile.ini itself: an update replaces it. Put the settings you change in an override, which wins over the shipped file:

  • settings/override/logfile.ini.append.php for every siteaccess,
  • settings/siteaccess/<siteaccess>/logfile.ini.append.php for one siteaccess,
  • extension/<extension>/settings/logfile.ini.append.php in an extension (read when the extension is active).

SiteAccessList

Which siteaccesses one run counts. Each reads the access log its own logfile.ini
[AccessLogFileSettings] names. Empty: only the siteaccess the run is for
(runcronjobs.php -s <siteaccess>), as the cronjob always did.
Example: SiteAccessList[]=site

Default: an empty list.

<?php /* #?ini charset="utf-8"?
# settings/override/logfile.ini.append.php
[ViewCountSettings]
# an empty "SiteAccessList[]" first replaces the shipped list; without it the items are added
SiteAccessList[]
*/ ?>

AllSiteAccesses

enabled: count every siteaccess of AvailableSiteAccessList[] that has an access log,
except the administrations. SiteAccessList[] is not read then.

Default: disabled.

<?php /* #?ini charset="utf-8"?
# settings/override/logfile.ini.append.php
[ViewCountSettings]
AllSiteAccesses=disabled
*/ ?>

MatchSiteAccess

How the lines of a log are given to siteaccesses. auto: by the kernel's siteaccess
matching (site.ini [SiteAccessSettings] MatchOrder) when more than one counted siteaccess
reads the log, else all lines to the one; enabled: always matched, so a log of several sites
counts only the lines of the counted siteaccess; disabled: never matched (every siteaccess of
a shared log counts every line).

Default: auto.

<?php /* #?ini charset="utf-8"?
# settings/override/logfile.ini.append.php
[ViewCountSettings]
MatchSiteAccess=auto
*/ ?>

StateDir

Where the resume state is kept: one file per log, with each siteaccess's place in it.
Empty: viewcount below the VarDir of the run's siteaccess. A relative path is below the
installation.

Default: empty.

<?php /* #?ini charset="utf-8"?
# settings/override/logfile.ini.append.php
[ViewCountSettings]
StateDir=
*/ ?>

LockTimeout

How long a run waits, in seconds, for another run that reads the same log.

Default: 60.

<?php /* #?ini charset="utf-8"?
# settings/override/logfile.ini.append.php
[ViewCountSettings]
LockTimeout=60
*/ ?>

RotatedSuffixes

The names of a log's rotated copy, appended to its name. After a rotation the rest of the
copy is read first, then the new log from its start. A copy is recognized by its inode or its
first line, so a compressed copy (.1.gz) is found too.

Default: a list of 3: .1, .1.gz, .0.

<?php /* #?ini charset="utf-8"?
# settings/override/logfile.ini.append.php
[ViewCountSettings]
# an empty "RotatedSuffixes[]" first replaces the shipped list; without it the items are added
RotatedSuffixes[]
RotatedSuffixes[]=.1
RotatedSuffixes[]=.1.gz
RotatedSuffixes[]=.0
*/ ?>

MaxLineLength

The longest line read, in bytes. Longer lines are skipped.

Default: 65536.

<?php /* #?ini charset="utf-8"?
# settings/override/logfile.ini.append.php
[ViewCountSettings]
MaxLineLength=65536
*/ ?>

LineRegexp

A log format of its own: a regular expression with named groups time, request, status and,
optional, host, ip, agent, referer. Empty: the common, combined and vhost_combined formats
(Apache, nginx, Plesk, Velocity), recognized by each line.

Default: empty.

<?php /* #?ini charset="utf-8"?
# settings/override/logfile.ini.append.php
[ViewCountSettings]
LineRegexp=
*/ ?>

ViewModes

The view modes counted for /content/view/<view mode>/<node>. Empty: every view mode.

Default: an empty list.

<?php /* #?ini charset="utf-8"?
# settings/override/logfile.ini.append.php
[ViewCountSettings]
# an empty "ViewModes[]" first replaces the shipped list; without it the items are added
ViewModes[]
*/ ?>

Methods

The request methods counted. Empty: every method.

Default: a list of 1: GET.

<?php /* #?ini charset="utf-8"?
# settings/override/logfile.ini.append.php
[ViewCountSettings]
# an empty "Methods[]" first replaces the shipped list; without it the items are added
Methods[]
Methods[]=GET
*/ ?>

Statuses

The response statuses counted. 304 (not modified) is a view of a page the browser had.
Empty: every status.

Default: a list of 2: 200, 304.

<?php /* #?ini charset="utf-8"?
# settings/override/logfile.ini.append.php
[ViewCountSettings]
# an empty "Statuses[]" first replaces the shipped list; without it the items are added
Statuses[]
Statuses[]=200
Statuses[]=304
*/ ?>

SkipExtensions

Paths ending in these extensions are files, not page views.

Default: a list of 33: css, js, mjs, map, png, jpg, jpeg, gif, webp, avif, svg, ico ....

<?php /* #?ini charset="utf-8"?
# settings/override/logfile.ini.append.php
[ViewCountSettings]
# an empty "SkipExtensions[]" first replaces the shipped list; without it the items are added
SkipExtensions[]
SkipExtensions[]=css
SkipExtensions[]=js
SkipExtensions[]=mjs
SkipExtensions[]=map
SkipExtensions[]=png
SkipExtensions[]=jpg
SkipExtensions[]=jpeg
SkipExtensions[]=gif
SkipExtensions[]=webp
SkipExtensions[]=avif
SkipExtensions[]=svg
SkipExtensions[]=ico
SkipExtensions[]=bmp
SkipExtensions[]=tif
SkipExtensions[]=tiff
SkipExtensions[]=woff
SkipExtensions[]=woff2
SkipExtensions[]=ttf
SkipExtensions[]=otf
SkipExtensions[]=eot
# ... 13 more in the shipped file
*/ ?>

SkipPathPrefixes

Paths starting with these are not page views: files, services and module views. They are
compared with the path as requested and with the path without the siteaccess's part.

Default: a list of 18: /var/, /design/, /extension/, /share/, /lib/, /.well-known/, /ezjscore/, /api/, /user/, /layout/, /content/search, /content/download/ ....

<?php /* #?ini charset="utf-8"?
# settings/override/logfile.ini.append.php
[ViewCountSettings]
# an empty "SkipPathPrefixes[]" first replaces the shipped list; without it the items are added
SkipPathPrefixes[]
SkipPathPrefixes[]=/var/
SkipPathPrefixes[]=/design/
SkipPathPrefixes[]=/extension/
SkipPathPrefixes[]=/share/
SkipPathPrefixes[]=/lib/
SkipPathPrefixes[]=/.well-known/
SkipPathPrefixes[]=/ezjscore/
SkipPathPrefixes[]=/api/
SkipPathPrefixes[]=/user/
SkipPathPrefixes[]=/layout/
SkipPathPrefixes[]=/content/search
SkipPathPrefixes[]=/content/download/
SkipPathPrefixes[]=/content/edit/
SkipPathPrefixes[]=/content/action
SkipPathPrefixes[]=/notification/
SkipPathPrefixes[]=/shop/
SkipPathPrefixes[]=/rss/
SkipPathPrefixes[]=/Q/
*/ ?>

BotUserAgents

Requests whose user agent contains one of these (in any case) are robots, not views.

Default: a list of 24: bot, crawl, spider, slurp, scrap, warmer, preview, monitor, uptime, pingdom, curl/, wget/ ....

<?php /* #?ini charset="utf-8"?
# settings/override/logfile.ini.append.php
[ViewCountSettings]
# an empty "BotUserAgents[]" first replaces the shipped list; without it the items are added
BotUserAgents[]
BotUserAgents[]=bot
BotUserAgents[]=crawl
BotUserAgents[]=spider
BotUserAgents[]=slurp
BotUserAgents[]=scrap
BotUserAgents[]=warmer
BotUserAgents[]=preview
BotUserAgents[]=monitor
BotUserAgents[]=uptime
BotUserAgents[]=pingdom
BotUserAgents[]=curl/
BotUserAgents[]=wget/
BotUserAgents[]=python
BotUserAgents[]=java/
BotUserAgents[]=go-http-client
BotUserAgents[]=okhttp
BotUserAgents[]=libwww
BotUserAgents[]=httpclient
BotUserAgents[]=headless
BotUserAgents[]=lighthouse
# ... 4 more in the shipped file
*/ ?>

SkipEmptyUserAgent

enabled: a request without a user agent is a robot.

Default: enabled.

<?php /* #?ini charset="utf-8"?
# settings/override/logfile.ini.append.php
[ViewCountSettings]
SkipEmptyUserAgent=enabled
*/ ?>

Generated by ./console exp:help:examples from settings/logfile.ini. Do not edit this page: change the source and generate again (how). Free documentation: GFDL 1.3 or later.

Something wrong on this page? Report an error

Documentation license

This documentation is free documentation, licensed under the GNU Free Documentation License 1.3 or later.

Exponential Copyright © 1998-2026 Exponential Foundation and 7x