DebugIPList

Summary

Sets the hosts that receive debug output.

Usage

DebugIPList[]

 DebugIPList[]= ip1|network1

 DebugIPList[]= ip2|network2
 ...

Description

The setting DebugByIP must be set to enabled to make this setting have any effect.

Note : From Exponential 5.4 / 2014.09, this feature is compatible with IPv6.

Examples

DebugIPList[]=1.2.3.4
DebugIPList[]=192.0.0.42
DebugIPList[]=192.0.0.0/27

These settings enable debug output for the hosts 1.2.3.4, 192.0.0.42 and the network specified by the range 192.0.0.0/27