DebugIPList

Written by Frederik Holljen, 02/02/2005 Updated 10/27/2014 by Graham Brookins Maintainers: Frederik Holljen, Sarah Haïm-Lubczanski

Summary

Sets the hosts that receive debug output.

DebugIPList[]

 DebugIPList[]= ip1|network1

 DebugIPList[]= ip2|network2
 ...

The setting DebugByIP must be set to enabled to make this setting have any effect.

Note : From Exponential 5.4 / 2014.09, this feature is compatible with IPv6.

DebugIPList[]=1.2.3.4
DebugIPList[]=192.0.0.42
DebugIPList[]=192.0.0.0/27

These settings enable debug output for the hosts 1.2.3.4, 192.0.0.42 and the network specified by the range 192.0.0.0/27

Add a comment